LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2003 >> C70 2.3 53, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 78 (Engine - Removal, Replacement And Installation (Coupe)) >> Cylinder Head (B5234T3; 1998-2002) >> Cylinder head/gasket, replacing >> Replacing the cylinder head/gasket >> Cylinder head gasket, installing >> Applying liquid gasket

Applying liquid gasket

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Liquid Gasket Application
GLL108881Courtesy of VOLVO CARS OF NORTH AMERICA.

Install new O-rings around the spark plug wells at the cylinder head.

Apply liquid gasket 1161 059  to the camshaft cover.

Use roller 9512767 . The surface must be covered without any excess  .

NOTE:

Make sure that no liquid gasket gets into the oil channels.