Installing the remaining screws on the gearbox and starter motor

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Cable Harness Clamps

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

the screws for the gearbox and engine. Tighten to 50 Nm
the screws for the clamps for the wiring.