Installing the delivery line on the rubber hoses and torque rod screws

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Charge Air Pipe Hose Clamps

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

the turbo pipe on the rubber hoses. Tighten the hose clamps
the screws for the clamps on the gearbox. Tighten to 10 Nm
the torque rod and the screws. Tighten to 50 Nm .