LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2003 >> C70 2.3 53, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 78 (Engine - Removal, Replacement And Installation (Coupe)) >> Crank Mechanism (M56; 1998-2002) >> Flywheel, replacement >> Installing the gearbox >> Installing and tightening the screws for the gearbox

Installing and tightening the screws for the gearbox

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Gearbox / Engine Screws
GLL109343Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the screws for the gearbox and engine. Tighten the two larger screws. Tighten to 50 Nm  . Tighten the two smaller screws. Tighten to 25 Nm  .

Remove the fixture from the gearbox.

scientia non olet · About LEMON Manuals