Checking for an open-circuit
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
- Check cable between connector 24/2 terminal C7 and engine control module (ECM) for an open-circuit according to Open-circuit, permanent faults .
Continue when the fault has been remedied.
- Continue
Refer to Verification
- Check cable between fuel tank pressure sensor terminal 3 and connector 24/4 terminal E5 for an open-circuit according to Open-circuit, permanent faults .
Continue when the fault has been remedied.
- Continue
Refer to Verification
- Check cable between connector 24/2 terminal C6 and connector 24/4 terminal E5 for an open-circuit according to Open-circuit, permanent faults .
Continue when the fault has been remedied.
- Continue
Refer to Verification
- Check cable between connector 24/2 terminal C6 and engine control module (ECM) #B31 for an open-circuit according to Open-circuit, permanent faults .
Continue when the fault has been remedied.
- Continue
Refer to Verification