Removing the SRS Airbag From the Panel
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Under no circumstances use an ohmmeter or other live measuring instrument to take readings on a disconnected, non-deployed airbag module. This could deploy the airbag.
CAUTION:
Remove only the illustrated screws and nuts.
WARNING:
The passenger airbag module must never be taken apart, repaired or moved to another vehicle. For handling of a replaced module, see Handling Replaced SRS Airbags/Seat Belt Tensioners .
Remove 6 M6 nuts, 10 mm from passenger airbag module.
When installing, torque tighten to 10 Nm .