Handling Replaced SRS Airbags/Seat Belt Tensioners: Handling

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating Driver And Passenger Airbags

Courtesy of VOLVO CARS OF NORTH AMERICA.

WARNING: Non-deployed pyrotechnical SRS components must not be deployed or ignited inside the vehicle.

For disarming of non-deployed pyrotechnical SRS units, see Non-Triggered SRS Components, Destruction .

When removing, refer to the instructions in section:

See After A Collision In Which the SRS System Has Been Deployed
See AIRBAG STEERING WHEEL MODULE, STEERING WHEEL AND CONTACT REEL
See Replacing the Passenger Airbag Module
See SRS Control Module
See Front Seat Belt
See Rear Seat Belts

WARNING: Airbag modules/pyrotechnical seat belt tensioners must never be taken apart, repaired or transferred to another vehicle.

WARNING: Under no circumstances use an ohmmeter or other live measuring instrument to take readings on a disconnected non-deployed airbag/pyrotechnical seat belt tensioner. This could deploy the airbag/pyrotechnical seat belt tensioner