Locking the Contact Reel

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing Screw From Parking Position Securing Contact Reel Into Lock Position

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove screw Torx 20 from its parking hole (A) in the steering wheel. Do not detach the screw from the plastic strip.
Install the screw into the locking position (B) in the contact reel.
The contact reel is now locked (secured).

CAUTION: Do not turn the steering wheel when the contact reel is locked as the contact reel pin will break off.