Installing Seat Belt Tensioner Connector
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
The battery should not be connected when SRS ignition cable igniter connector is removed or installed.
- Connect SRS ignition cable igniter connector to seat belt tensioner.
Installing "B" Post Inner Panel.
- Install "B" post inner panel. Push into place (attached with clips).