Installing Rear Panel
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of VOLVO CARS OF NORTH AMERICA.
When replacing the center console 6 holes must be drilled for the rear panel in the new center console.
Cut out a piece of the old center console and use it as a template to drill holes in the new center console.