Setting Damper Motors, Damper For Self-Adjustment: Setting
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Connect the damper motor switch.
Ignition on.
Start the blower fan motor.
Move the damper motor to a limit position using the button for temperature control.
Turn the damper on the climate control unit to the corresponding position using a screwdriver or similar that can be inserted in the hole. See the illustration.
Install the motor according to Replacing damper motors
Carry out self-adjustment of the damper motor end positions. This is carried out via VIDA communication.