Control Module

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Control Module Connector & Locking Handle

Courtesy of VOLVO CARS OF NORTH AMERICA.

Push the control module bracket upwards/inward to release the bracket brace from the side member.

Fold down the bracket with control module.

Position a screwdriver between the control module connector and its locking handle.

Twist the screwdriver to release the catch.

Continue to pull the locking handle outward until the connector comes away from the control module.

Remove control module from bracket.