Control Module
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Install a new control module on the bracket. Torque to 4.5 Nm .
Connect connector to the control module.
The connector will be pushed into place when the locking handle is pressed in completely.
Hook the bracket and control module into place on the side member.
Install both screws into the bracket. Tighten screws to 25 Nm .
Screw water pump into place on the bracket.