Heat Exchanger And Glow Plug
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Transfer the fuel pump to the new heat exchanger.
Assemble the fan shroud and combustion unit with the heat exchanger.
Center socket for the glow plug in the flame shield with the mounting on the heat exchanger.
Install:
- glow plug in heat exchanger.
NOTE:
If the glow plug can be screwed in by hand the glow plug socket in the flame shield has been centered correctly. Torque to 15 Nm
.
- glow plug cable.
- cap over terminal.