Components Under The Cover

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Heat Exchanger Ground Lead, Coolant Temperature Sensor And Overheat Protection Thermostat With Holder

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

heat exchanger ground lead.
coolant temperature sensor and overheat protection thermostat with holder.

NOTE: Check that the coolant temperature sensor and overheat protection thermostat holder is not in contact with wiring.

quick-release fuel line connector holder.
quick-release connector onto nozzle pipe and screw holder into place.
cover over sensors and quick-release fuel line connector.
inlet hose onto heat exchanger bracket.