Replacing Fuel Injection Nozzle, Fan Motor And Nozzle Pipe: Installing: Cables

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Blower Fan Motor Cables, Flame Sensor And Fan Shroud With Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Connect blower fan motor cables.

Route cables under nozzle pipe.

Install flame sensor.

Install fan shroud (3 screws).