Removing Receiver/Drier Or Suction Pipe: Preparations
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
- First read section Before Starting Work On The Receiver/Drier Or Suction Pipe
- Disconnect the battery negative lead
- Drain the refrigerant from the system. See Refrigerant, Overview and Draining Refrigerant
- Remove the fresh air intake for the control module box.