Additional Work In the Engine Compartment On Cars With Air Conditioning (A/C):

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Screw Holding Pipe Connector And Receiver/Drier Bracket

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the screw holding the pipe connector and the receiver/drier bracket (to facilitate disconnecting pipes from the evaporator).

Fig 2: Identifying Evaporator Pipe, Cover Plate And Rubber Seal

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the pipe from the evaporator using special tool 9995385 and 9995472 and plug the pipe
Remove cover plate and rubber seal for lead-in.