Installing the Flame Sensor

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Connect the flame sensor, blade terminal and connector to the cut cables.
NOTE: If the wiring on the flame sensor is sufficiently long poke out the existing cable terminals and connect the wiring to 8-pin connector for the control module.
The flame sensor has a fixed polarity, connect the blue cable (+) to terminal 6 on the control module.