WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Screw With Washers
Courtesy of VOLVO CARS OF NORTH AMERICA.
Install a new
screw with washers. Lubricate screw thread. Tighten to 105 Nm
, then angle-tighten to 120°
.
Secure fuel line in the plastic clips on the front edge of the frame.