Installing clamp ring

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Crosswise Tightening Pattern

Courtesy of VOLVO CARS OF NORTH AMERICA.

Hubs with four wheel bolts: Install clamp ring 9995442 on hub with wheel nuts.

Hubs with five wheel bolts:

Install clamp ring 999 5419 from measurement tool set 9995418 on hub with wheel nuts.
Make sure that contact surfaces on brake disc and clamp ring are clean.
Tighten bolts hand tight, then tighten across to 110 Nm (80 ft.lb.). When tightening with airgun, use torque socket 1158147 .