LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2003 >> C70 2.3 53, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 69 (Wheel Brake - Removal, Replacement And Installation (Coupe)) >> Replacing Wheel Brake Components(1998-2002) >> Installing shims >> Cleaning and inspection

Cleaning and inspection

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Clean the brake pad contact surfaces in brake caliper.

Check the piston dirt guard.

If the dirt guard looks worn, replace it as a precautionary measure.

If the dirt guard is damaged, overhaul the brake caliper. Brake caliper rear, overhaul , Service Information, Brakes (incl. ABS and TRACS), 1992-, or Service Information, Brakes (incl. ABS and TRACS), 1996-.

Fig 1: Identifying Compressed Brake Caliper Piston
GLL125445Courtesy of VOLVO CARS OF NORTH AMERICA.

Press back the pistons with a pipe wrench or tool 9992809 . Take care not to damage the dirt guard.

Check that dirt guard is in position properly.