Fitting the wheel

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Crosswise Tightening Pattern

Courtesy of VOLVO CARS OF NORTH AMERICA.

Ensure that the mating surfaces on the brake discs and rims are clean.
Lubricate the centering lug on the hub for the rims with rustproofing agent, 116 1038-3.
Install the wheel.
Install the screws lightly. Then tighten the screws crosswise. Tighten to 110 Nm. When tightening using an impact wrench, use torque socket 1158147 .

NOTE:

Crosswise tightening and torque tightening is important to prevent stresses in the brake disc.