Replacing the control module, new system: Preparations
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
- The customer stored settings should be read off and noted before the control module is replaced. This is so that the new control module can be programmed in the same way as the old one. See System settings (customer settings), European market
or System settings (customer settings), Japanese market
.
The new RTI system is integrated in the CD ROM player. The new CD ROM player has two LEDs. These are on each side of the tray for CDs. The intermediate stage is positioned where the control module was previously.