Replacing wiper and/or turn signal indicator switch: Installing

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Wiper Switch, Turn Signal Indicator Switch, Steering Wheel Covers, And Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

NOTE:

The turn signal switch should be in the neutral position when it is installed. The pin that controls automatic cancel may otherwise be broken off.

Install:

wiper and/or turn signal indicator switch. Ensure that the ground lead is positioned under the lower mounting screw when it is installed.
steering wheel covers and screws.

Test switch function.