Connecting breakout box to connector (A) to immobilizer

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Connection Between Breakout Box, Connector A, And Immobilizer

Courtesy of VOLVO CARS OF NORTH AMERICA.

Ignition off.
Remove the control module from the bracket according to Replacing the control module .
Disconnect the connector (A) from the control module.

Connect the 10-pin connector on the adapter 9813194 to connector (A) and connect the breakout box 9813190 to adapter.

For connections in the car and breakout box see Connections in the car and in the breakout box .