Connecting breakout box
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition off.
- Expose the VGLA control module.
- Check the control module connectors and pins visually.
Connect the adapter between the VGLA control module and its connector and connect the breakout box to the adapter, adapter wiring 9511427.
Disconnect the breakout box in reverse order.
Other information
- To access the control module, see Removing the control module .
- For information about the signals and other values, see Signal specification, lock and alarm (VGLA) .