Replacing brake and clutch valves: Installing

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Vacuum Valves, Stop (Brake) Light Switch, And Vacuum Servo

Courtesy of VOLVO CARS OF NORTH AMERICA.

Assemble connector and connect vacuum hose to brake/clutch valve.
Install brake/clutch valve. Check location in bracket.
Shake (do not pull) brake/clutch valve lightly and check that it is secure.
Press pedal so that it is not in contact with the brake/clutch valve.
Pull piston out as far as possible and release pedal slowly. The brake/clutch valve will then adjust itself automatically.

Check function and check that brake/clutch valve is airtight.

Reinstall soundproofing panel.