Checking for contact resistance and oxidation
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
The engine did not start because of loose connections in the engine speed (RPM) sensor and/or engine control module (ECM) connectors.
- Check connectors for contact resistance and oxidation and remedy in accordance with Contact resistance and oxidation .
Continue when the fault has been remedied.
- Continue
Refer to Verification