Checking air conditioning (A/C) compressor signal cable
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition off.
- Breakout box connected.
- Connect control module.
- Air conditioning (A/C) switch on.
- Blower fan on.
- Start engine.
- Connect a voltmeter between connectors #6 (#B6) and #28 (#B28) on the breakout box.
The voltmeter should read battery voltage when the compressor is running.
- OK
- NOT OK
Refer to Checking for an open-circuit