Connecting the adapter
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of VOLVO CARS OF NORTH AMERICA.
- Check that no pins or sockets are damaged on the connector
- Gently press adapter
9511504
down into the grooves inside the control module box. Press to the limit position.
- Insert tool
9995722
around the adapter
- Move the upper section of the tool forwards as far as it will go. Pull the tool up.