Installing the EVAP Canister Shut-Off Valve
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
In reverse order.
Installing the clamp:
- squeeze the clamp with a pipe wrench until it locks.
NOTE:
Use a new screw clip at the EVAP canister. See replacement parts catalog. Use a new tie strap. Reuse the clamp at the rear axle joint.