Injector/pulse damper, replacement: Preparation
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Depressurize the fuel system acc. to:Fuel system pressure release .
Remove the cover over the fuel rail.
Disconnect the injector connectors.
Blow clean around the injectors.
Remove the mounting screws from the fuel rail.
Separate the fuel line quick-release connector.
Spray universal oil or similar around the injector terminals on the intake manifold.
Pull out the fuel rail and injectors. Do not work them loose from side to side.
NOTE:
Handle the injectors carefully to avoid damaging the injectors' fuel nozzles and fuel needles.