Removing injectors and pulsation dampers
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Remove
- the screws holding the mounting rail to the fuel rail
- the mounting rail
- the injector and the pulsation damper.
CAUTION:
In instances when the injectors must be replaced; all the injectors must be replaced at the same time (sold in sets). This is to ensure that the emission levels are correct.