Installing fuel filler pipe

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installing Rubber Cover On Fuel Filler Pipe

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install filler housing around top of filler pipe.
Check that the inner rubber seal is correctly seated and that the drain pipe is inside the inner seal.
Check that circlip (1) is in position. Lubricate rubber cover sealing surfaces (2) with petroleum jelly. Install cover and circlip (4).
Connect connectors to fuel pump (FP), level sensor, ABS sensors and fuel tank pressure sensor.
Install panels and carpets.