LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2003 >> C70 2.3 53, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 183 (Variable Valve Timing Unit - Checking & Adjusting (Coupe)) >> Engine >> Variable valve timing unit, checking and adjusting (B6XX4T (2002-2006)) >> Installing the crankshaft adjustment tool

Installing the crankshaft adjustment tool

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Adjustment Special Tool 999 5451
GLL108756Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the starter motor mounting screws. Pull out the starter motor and put it aside.

Remove the blind cover plug for the adjustment tool hole. Turn the crankshaft clockwise slightly. Install the adjustment tool 9995451 . Ensure the adjustment tool bottoms against the engine block.

scientia non olet · About LEMON Manuals