Installing the spring strut / wheel spindle

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installing Spring Strut On Wheel Spindle

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the spring strut on the wheel spindle. Use new screws and nuts .

Adjust in accordance with the measured values.

Tighten to 105 Nm . Angle-tighten 90° . Use bevel protractor 9512050 .