Removing the right control arm

Fig 1: Identifying Vibration Damper

Courtesy of VOLVO CARS OF NORTH AMERICA.

Applies only to cars with 6 cylinder engines: 

• Remove the vibration damper.

Fig 2: Identifying Right-Hand Engine Mounting Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

For all: 

• Remove both screws for the right-hand engine mounting.
• Lift the right-hand side of the engine approximately 25 mm to expose the control arm screw. Use a mobile jack.
  NOTE:

  Use a wooden block as a shim.

Fig 3: Identifying Sub-Frame Control Arm Screws And Nut

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove: 

• the screws and the nut for the control arm in the sub-frame
• the control arm.