Installing the drive shaft

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Stub Axle CV Joint Housing Sealing Ring Installed

Courtesy of VOLVO CARS OF NORTH AMERICA.

For all:

Clean the drive shaft splines
Check that the sealing ring on the driveshaft is in place.
Align the drive shaft in the hub.
Install a new screw to the driveshaft loosely.