Installing and tightening the screws for the transmission

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Transmission And Engine Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install all 6 x M10 screws securing the transmission to the engine.

First tighten alternately and crosswise to light contact.

At the same time, check that the whole of the transmission is in contact with the engine.

Then tighten the screws crosswise.

Remove the fixture from the transmission.