Checking the boot for the steering shaft/firewall
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Check that the bearing in the boot is in position.
If it has become detached apply a little grease to the edge of the boot (around the hole). Press the bearing back down into the boot.
Check that the boot is correctly positioned against the firewall and that the snap ring is correctly positioned. Adjust if necessary.
NOTE:
It is essential that the above checks are carried out. Otherwise there may be noise from the transmission/engine and road noise in the passenger compartment.