LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2003 >> C70 2.3 53, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 178 (Transmission Control Module, Clutch Driven Plate - Removal & Installation (Coupe)) >> Transmission >> Transmission, installing >> Installation >> Adjusting the height and angle using the mobile jack and the transmission fixture

Adjusting the height and angle using the mobile jack and the transmission fixture

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Adjusting Height & Angle Using Mobile Jack And Gearbox Fixture
GLL109404Courtesy of VOLVO CARS OF NORTH AMERICA.

Adjust height and angle with the mobile jack and the transmission fixture.

Locate the transmission on the engine.

Ensure that the transmission goes straight in, in relation to the engine, and that the guide sleeves and guide pin for the starter motor align in the guide holes on the transmission.