Relieving the load from the clutch diaphragm spring

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Relieving Load From Clutch Diaphragm Spring Using Special Tools

Courtesy of VOLVO CARS OF NORTH AMERICA.

NOTE:

Do not allow the diaphragm spring to be under load for a long period of time. Relieve the load as soon as possible. Leave the compression tool in position.

Applies only to certain engine versions with self adjusting clutches:

NOTE:

Keep fingers away from the three clutch rivets when relieving a load or removing the compression tool. There is a risk of clamping injuries.