Activating components
With this function the combined instrument panel gauge, warning lamps and displays be activated to Check that signals from control module to components are correct and that the LCD cells in the displays are undamaged.
The following gauges are activated at the same time:
- Speedometer
- Fuel gauge
- Temperature gauge
- Tachometer
The following warning lamps are activated at the same time:
- Low washer reservoir level
- Low fuel level
- Bulb failure warning sensor
- Low brake fluid level
- Parking brake on (does not flash if the parking brake is on)
- Low coolant level
- Service reminder indicator (SRI)
- Outside temperature
On activation the needles on the gauges go from minimum to maximum at the same time as the warning lamps flash. The odometer and trip odometer displays show all digits as zeros first. Then Ones are displayed: Twos, Threes and so on.
The clock and outside temperature gauge (trip computer) displays show all digits as zeros first. Then Ones are displayed: and Twos, Threes and so on at the same time as the trip computer function symbols flash. Note that the upper left segment of the clock's first digit is missing.
For further information about activation, see Activating components/functions .