Breakout box connection, continued

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Connector Terminals

Courtesy of VOLVO CARS OF NORTH AMERICA.

Connect adapter 9813194 to the module connectors (toward the wiring) and connect breakout box 9813190 to the adapter.

Control module connections #A1-#A30 correspond to #1-#30 on the breakout box and #B1-#B16 correspond to #31-#46 on the breakout box.

CD player connections #1-#16 correspond to #31-#46 on the breakout box.

TMC/FM receiver connections #1-#10 correspond to #47-#56 on the breakout box.

Fig 1: Identifying Connector Terminals

Courtesy of VOLVO CARS OF NORTH AMERICA.

The breakout box is designed to make it easier to read control module output and input signals when the module is connected and the resistance of the cables and components when the module is disconnected. Using the breakout box reduces the risk of unintentionally short-circuiting cables or damaging connector pins.

Fig 2: Climate Control Module Connectors Terminals

Courtesy of VOLVO CARS OF NORTH AMERICA.

NOTE:

As the TMC/FM receiver does not have its own ground connection, there is no need to check TMC/FM receiver ground terminals.