Reinstall Flywheel/Carrier Plate

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Gear Sector

Courtesy of VOLVO CARS OF NORTH AMERICA.

Use gear sector 9995112 and special screws 9995593 .

Install flywheel with three special screws and tighten (crosswise) to 45 Nm

Install the other standard screws, using new screws, and tighten to 45 Nm . Replace the three special screws with new standard screws and tighten diagonally to 45 Nm

Angle-tighten 65°

Automatic:

Reinstall the carrier plate, tighten in two stages:

1. Tighten to: 45 Nm

2. Angle-tighten: 50°