Install the Locating Pins In the Brake Caliper

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing/Installing Retaining Springs And Locating Pins For Brake Pads

Courtesy of VOLVO CARS OF NORTH AMERICA.

Check the rubber sleeves of the locating pins. Replace if necessary.

Insert the locating pins (2) in the rubber sleeves.

Tighten the locating pins. Tighten to 30 Nm . Install the protective caps (1).

Install the retaining spring (3).