Brake Fluid Reservoir, Replacing: Removal: Preparations
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Switch off the ignition.
Clean around filler cap at the connector between the reservoir and master cylinder and at any hose connector. This is to ensure that no contaminants enter the brake system.
Place paper under the master cylinder. This is to protect the paintwork from damage if brake fluid is spilled.
Secure the pedal in the depressed position. Use a pedal jack.