Removing The Screws For The SRS Airbag

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying SRS-Airbag Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove 3 M6 screws, 10 mm from the underside of the passenger airbag module.

When installing, torque tighten to 10 Nm .