Removing The Ignition Cable For The SRS Airbag

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Ignition Cable For SRS Airbag

Courtesy of VOLVO CARS OF NORTH AMERICA.

WARNING:

The battery must not be connected when the SRS ignition cable connector is being removed or installed.

WARNING:

Under no circumstances use an ohmmeter or other live measuring instrument to take readings on a disconnected, non-deployed airbag module. This could deploy the airbag.

Remove the SRS ignition cable from the side of the passenger airbag module.

NOTE:

Take care when removing the SRS ignition cable. There is a risk of damage to the SRS ignition cable if not handled carefully.